Mapping Cameras with OpenStreetMap's Web UI

From Mass Pirate Wiki
Revision as of 22:23, 9 September 2020 by Srevilak (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

This is a quick tutorial on how to map surveillance cameras with Open Street Map's web interface.

First, you'll need to find some surveillance cameras. I usually sketch them out in a small notebook. This is a sketch of two dome cameras on a telephone pole, at the corner of Division St. and Williams St. in Chelsea MA. Crude sketches are fine, as long as you can understand them later.

Sketch of Two Dome Cameras on a Pole


Back at your computer, log into OpenStreetMap and find the location where the camera resides. Here's the location I'd sketched out.

Intersection of Williams St. and Division St. from Open Street Map


Next, click Edit (in the upper left corner of OpenStreetMap's web interface. You'll see the editing UI, which looks like this:

OpenStreetMap's Editing UI


Note the "Add Feature" toolbar and the "Point" button. We'll add a point to represent the camera. Click the "Point" button, then click the map area where the camera is located.

Once the point is on the map, search for a "feature type" of "Surveillance Camera".

Adding a point to OpenStreetMap, and categorizing it as a Surveillance Camera


Provide information about the camera. Here's a screenshot of the metadata I provided. When editing OSM, it's good etiquette to fill out the "Sources" field. I used "local knowledge" because I saw the camera in person. If you know the camera's orientation, consider filling in the "Direction" field (I left it blank because I couldn't tell).

Surveillance Camera Metadata


When you're done editing, click "Save" (in the upper right). OpenStreetMap will ask you for a change comment (I said "Added surveillance camera at the corner of Williams and Division"), then click "Upload".

After a little time, you should be able to see your changes on https://cctv.masspirates.org/.